Separator for abrasive materials 500 liters

Separator for abrasive materials 500 liters
500 l
  • Hopper capacity, l
    500 l
KITTING
  • Cascade-type separator
  • Hopper storage to 500 liters

 

A more productive work with a large amount of abrasive materials;

Abrasive loading in the hopper – heat exchanger volume of 500 liters for reuse or recycling; 

It comes with abrasive device Blastcor®BM- 200 or with a hopper for collecting the spent abrasive material. As a hopper to collect the spent abrasive material for subsequent recycling is possible to use existing capacities of the customer.

The principle of the work in the set

The hopper is designed to use in set for work where you need more abrasive material with minimum loss of time on the pre-loading of Blastcor®BM-200 abrasive material devices. Thanks to heat exchanger hopper volume of 500 liters, which is located above additionally supplied abrasive material device Blastcor®BM- 200 or hopper for waste disposal volume of 200 liters, the kit allows to load of abrasive material once per two hours. Possible delivery includes hopper with installed perforated sieve, the heat exchanger with a hopper volume of 500 liters of storage and transportable vacuum system VAC® with a dust collector.

The abrasive material is poured in to the hopper storage and moves by the suction hose in to the heat exchanger, wherein the abrasive material is separated into fractions. For using suitable abrasive material passing through perforated sieve is moved to the storage hopper in volume of 500 liters, but large and unsuitable for usage particles that not passing through the sieve are collected in the catcher, and the fine dust is transferred by a suction hose to a dust collector.

   Dusty air that is sucked with suction vacuum pump is passing through the two filter elements and is cleaned of small and dust particles that are accumulated on the filter elements with an efficiency of 98%. Filter elements without stopping the working process of vacuum device are cleaned with short pulse of compressed air. The dust that is shaken off the filter element enters the receptacle from which it is recyclable after use.

This kit is used in the manufacturing facilities that are specially prepared for handling abrasive products or for completion of abrasive blasting chambers. The advantage of this system is continuous high performance and environmentally friendly to use. The kit includes vacuum and connecting hoses with quick connections.

Thanks to the heat exchanger hopper volume of 500 liters, which is located above additionally supplied abrasive material device Blastcor®BM-200 or a hopper for waste disposal volume of 200 liters, the kit allows loading the abrasive material once per two hours.

Ask a Question
captcha
"Jaunrudas", Marupes nov., LV-2167, Riga, Latvia
+371 256 14 146
Request a call