BLASTCOR BM-300RC TWO-OPERATOR SANDBLASTING MACHINE

BLASTCOR BM-300RC TWO-OPERATOR SANDBLASTING MACHINE
300 l.
up to 70 m2/h
8.3 atm
  • Bunker Volume, l.
    300 l.
  • Capacity,m2/h
    up to 70 m2/h
  • Pressure, atm
    8.3 atm
  • Compressed Air Consumption, m3/min
    4.5-10 m3/min
  • Pneumatic piping
    1 1/4"
  • Mass, kg
    198
  • Dimensions, mm
    870x1020x1740
  • Producer
    EU
KITTING
  • Lid

  • Silencer
  • Receiver
  • REMCON® Remote Control with a Control Key and a 20 m TWIN hose – 2 sets
  • SANDSTURM®-P pneumatic-controlled lock for all abrasive materials, 2 ps.
  • CQT-2 quick-split set to switch on the abrasive-feed hose, 2 sets.
  • Cam-Lock quick-split set to switch on the compressed-air feed.
  • NHP-2 nylon nozzle-holder, 2 ps.
  • Pressure Vessel Certificate.
  • Operation Manual

The high-efficiency two-operator Blastcor® BM-300 RC sandblasting machine is for for longer abrasive blasting jobs without abrasive reloading, which makes it possible to clean up to 70 m2 of surfaces with one batch of abrasives. The machine is equipped qith a feeding 2-inch piping, a pulsation evener for the compressed air, two pneumatically-controlled SANDSTURM®-P abrasive batchers that allow two operators to work simultaneously. Another option is that one operator treats the surface, another one blows off the dust from the treated surface.

APPLICATION SPHERE

The professional Blastcor® BM-300 RC shot-blasting machine owing to its advanced features can be used at large output industrial enterprises, shipbuilding plants and dockyards. It is also applicable at car maintenance shops, automobile and railway bridges, in oil and gas storages, for removing oil products, lubricants, older paints, scales, dirt, corrosion and other foreign materials, making an ideal surface to be treated with anti-corrosion coating.

ABRASIVE MATERIALS USED

The Blastcor® BM-300 RC abrasive-blast machine is equipped with a SANDSTURM® universal abrasive batcher that makes it possible to use any abrasive of the 0,1-4,00 mm size – cast, chopped, cast iron or steel shots, marble or granite aggregate, glass beads, alumina, silicon carbide, fused alumina, mineral slags (copper and nickel), as well as other abrasives available for abrasive blasting jobs.

OPERATION PRINCIPLE

The Blastcor® BM-300 RC sandblasting pressure type machine with a remote control feeds abrasives into the mixing chamber via the SANDSTURM®-P proportioning valve and the compressed air via a pneumatic piping.

After being mixed in a set proportion, the abrasive-air mixture is fed under high pressure into an abrasive-blast hose and accelerated in the nozzle is applied to the surface treated.

 

  • COMPRESSED AIR SILENCER
    COMPRESSED AIR SILENCER

    The Blastcor® BM-300 RC two-operator shot-blasting machine is equipped with an oulet silencer that decreases the noise level when the machine gets depressurized and also collects abrasive particles in the air, which prevents operator injuries. 

  • QUICK-DISCONNECT CLAMP DEVICE
    QUICK-DISCONNECT CLAMP DEVICE

    All Blastcor® sandblasting machines are equipped with quick-split «CLAMP» connections which takes 5 seconds to remove the batch, dispose of the abrasives or remove foreign bodies which prevent the work, or change the lock for maintenance.

  • TWO REMOTE CONTROL DEVICES
    TWO REMOTE CONTROL DEVICES

    The REMCON® remote control makes it possible to remotely switch on the device by pressing the control key and switch it off quickly by releasing the control handle. Using the machine without the remote control is extremely dangerous and may cause serious injuries. The REMCON® distant control also helps save compressed air and abrasive consumption thus increasing the efficiency. The Blastcor® BM-300 RC sandblasting machine is equipped with two REMCON® remote control devices that make it possible for two operators to treat the workpiece at the same time. The REMCON® remote control makes it possible to remotely switch on the device by pressing the control key and switch it off quickly by releasing the control handle. Using the machine without the remote control is extremely dangerous and may cause serious injuries. The REMCON® distant control also helps save compressed air and abrasive consumption, thus increasing the efficiency.

    read more
  • TWO PAIRS OF WHEELS
    TWO PAIRS OF WHEELS

    The Blastcor® BM-300 RC abrasive-blast machine has two pairs of wheels – the main one of increased diameter and the additional one to move the machine on the building site without effort. In the operating position the machine stands on three robust supports without any load to wheels, which increases their life. Excellent center-point makes it easy to transport the machine by hand to a considerable distance even when it is loaded with abrasives.

    read more
  • 90° CONE-TYPE BOTTOM;
    90° CONE-TYPE BOTTOM;

    The Blastcor® BM-300 RC sandblasting machine has a 90° cone-type bottom, which provides a better abrasive material fall from walls and prevents moisture absorption on the vessel walls.

  • AIR RECEIVER
    AIR RECEIVER

    Two-operator Blastcor® BM-300 RC sandblasting machine is equipped with a receiver to smooth the incoming compressed air pulsations.

  • INSPECTION WINDOW
    INSPECTION WINDOW

    The Blastcor®BM-300 RC abrasive-blasting machine has an easily opening inspection window of a higher size to allow an easy access to the internal parts.

  • PNEUMATIC BATCHERS FOR ABRASIVES
    Пневматические дозаторы абразива

    The Blastcor® BM-300 RC shot-blasting machine includes two high-efficiency pneumatic SANDSTURM®-P batchers for abrasives. The machine is equipped with a specially designed high-efficiency SANDSTURM® portion control valve. The latter device has an increased through diameter of the 28-mm rubber or polyurethane pipe in the abrasive feeding part, which makes it possible to finely regulate the abrasive feed, irrespective of its nature and size, from glass beads of several micrones in diameter to chipped cast-iron shots and granite up to 4 mm. The rubber or polyurethane pipe in the abrasive feeding lines guarantees the interruption-free work of 12 or more months. The polyurethane pipe considerably increases the life-time. The SANDSTURM®-P metering valve proves an innovation design that is reliable, simple and easy to maintain. The main feature of the device distinct from market availables is an increased through diameter to allow a larger volume of abrasive entering the mixing chamber, which increases the efficiency with the increase of the pressed-air volume fed. The SANDSTURM®-P metering batcher employs the pneumatic control to open or shut the lock, thus economizing up to 40% of abrasive thanks to a complete stop of abrasive feeding when the air is stopped. It also allows the operator to blow off abrasive particles from hard-to-achieve places. All that saves up to 30% diesel oil when used compressors with diesel engines. The SANDSTURM®, as a plus, allows to feed the abrasives into the mixing chamber under the angle of 45°, which makes it possible to achieve the maximum efficiency when abrasives of different nature are used.

    read more
Ask a Question
captcha
"Jaunrudas", Marupes nov., LV-2167, Riga, Latvia
+371 256 14 146
Request a call